Hazardous Materials Storage - HSE Guidlines (2023)

Hazardous Substance CupboardsandControl of Substances Hazardous to Health Regulations 2002 (CoSHH)

This note is addressed to anyone considering installing a Hazardous Substance Cupboard who might be concerned about complying with the legislation governing the storage of substances potentially hazardous to health.

HazStorage’s Hazardous Substance Cupboards have been designed to help employers comply with the requirements of CoSHH. The thrust of these regulations is the reduction (if not the removal) of the risk to health caused by hazardous substances. The regulations call for risk assessments to be conducted by employers to analyse the risks associated with the use of hazardous substances. They also call for employers to take steps, appropriate to the circumstances, to reduce or remove risks to health. Our view is that the provision of a lockable, easily-identifiable cupboard for the segregated storage of hazardous substances, would be an appropriate step for an employer to take to reduce exposure and the risk to health.

(Video) Chemical Safety #10 HAZMAT (Hazardous Material) Storage and Transport Requirements & Conditions

Please note that the Control of Substances Hazardous to Health Regulations 2002 do not specify the size, design, construction, features or materials to be used in a Hazardous Substance Cupboard.

For complete peace of mind, contact must be made with the Health and Safety Executive whose role it is to offer advice on health and safety issues. HSE can be contactedvia theironline formor by calling them on 0300 003 1747.

HSE Guidelines

Segregation of hazardous materials

(Video) Safe storage Hazardous chemicals

This Technical Measures Document refers to issues surrounding the storing and segregation of hazardous materials and how it can be used to minimise the foreseeable risks of a major accident or hazard.
The relevant Level 2 Criterion is5.2.1.3(29)c, g.

General principles

(Video) Hazardous Waste || 4 Types of Hazardous Waste || Four Classifications of Hazardous Waste

The following aspects should be considered with respect to the Segregation of Hazardous Materials:

  • Human factors;
  • Poorly skilled work force;
  • Ignorance towards physical and chemical properties of stored substances;
  • Unconscious and conscious incompetence;
  • Plant lay-out; and
  • Plant siting.

The following issues may contribute towards a major accident or hazard:

  • Failure to understand the properties of substances handled;
  • Failure to identify hazards associated with mixing substances and domino events;
  • Failure of quality assurance procedures;
  • Insufficient recording of chemical inventories at each location on site;
  • Insufficient labelling of chemical storage containers (raw materials, reactants, intermediates, products, by-products and waste);
  • Poor warehousing management systems;
  • Poor house keeping.

Contributory factors for an assessor to consider concerning all aspects of Segregation of hazardous materials

(Video) How to Safely Dispose of Hazardous Waste?

The Safety Report should address the following points:

  • Whether formal hazard identification and risk assessment has been used to determine the need for segregation (e.g. HAZOP, HAZAN, QRA);
  • Whether there is a chemical inventory system sufficient to address and categorise hazardous materials into compatible groups;
  • Whether there is a sufficient site plan illustrating a compact block layout system with designated zones/plots for compatible hazardous materials (zones 0, 1 & 2, oxidising agents, flammable substances, explosive substances, strong acids, cyanide compounds, LPG);
  • Whether hazardous areas are classified and sufficient to segregate compatible, hazardous materials to avoid overlap of these areas. (oxidising agents and flammable substances areas should not overlap, strong acids and cyanide compound areas should not overlap, peroxides should not be stored near any metallic compounds that could cause decomposition and the liberation of oxygen);
  • Whether sufficient areas have been designated for hazardous substances with low flash points (Class I, II(1), II(2), III(1) & III(2) see the Further Reading section at the end of this page relating to the Refining Safety Code and Basic Classification of Flammable and Combustible Liquids);
  • Whether there are sufficient warning signs in place to inform employees and visitors of the potentially, hazardous environments they are approaching (no smoking signs, flammable area, intrinsically safe zone);
  • Whether there are sufficient traffic routes for the emergency services to safely access and egress a hazardous area in the event of an emergency;
  • Whether the emergency services are aware of all risks associated within and around the segregated areas;
  • Whether the designated plots for containing hazardous substances are sited on impervious ground with an adequate drainage slope, (1 in 40 to 1 in 60);
  • Whether mixing of incompatible substance can occur within the drainage system or anywhere that leaks/spills may accumulate (in particular consideration of the location and routing of pipelines/pumps etc from which hazardous substances may leak);
  • Whether the processes and plant operating procedures minimise the inventories of hazardous substances stored, handled or in process;
  • Whether plots containing flammable and toxic chemicals are sufficiently ventilated;
  • Whether enclosed plots containing flammable chemicals have sufficient explosive relief systems within the building structure to allow for safe relief ventilation;
  • Whether the bund facilities are sufficient to contain a maximum volume of spillage from a hazardous chemical storage vessel;
  • Whether there are sufficient emergency provisions in place to control the risks associated with leaks and spills (fire extinguishers/blankets/hydrants, absorbent materials, PPE/RPE, emergency services, emergency evacuation procedures); and
  • Whether there are sufficient escape routes in place in the event of a major accident or hazard (minimum of two escape routes, no dead end should exceed 8 metres).

Major hazards

Major hazards could arise from the following:


  • Storing incompatible substances together;
  • Domino effects (e.g. thermal radiation from fires);
  • Direction of leaks to common sumps/manifolds;
  • Incorrect labelling/delivery of raw materials, intermediates and products;
  • Introduction of ignition sources into segregated areas containing flammable, combustible and explosive substances (e.g. smoking, mobile equipment and vehicles, power tools);
  • Use of non-intrinsically safe equipment within intrinsically safe zones;
  • Poorly managed inventory control and identification systems for hazardous chemicals stored in drums and vessels;
  • Poor house keeping.

Codes of Practice and guidance relating to the Segregation of hazardous materials

The following publications can be used as guidance material relating to segregation of hazardous materials:

  • LPGA Code of Practice 1. Bulk LPG Storage at Fixed Installations (Part 1, Part 2, Part 3 and Part 4), LP Gas Association.
  • Supersedes HS(G)34 Storage of LPG at fixed installations, HSE, 1987.
  • Part 3, Section 2 gives guidance on plant location and safety distances. Table 1 provides separation distances from buildings, boundaries and sources of ignition. Table 2 provides separation distances from other flammable liquids depending upon vessel size and flammable liquid flash point. Table 3 provides separation distances from liquid oxygen storage.
  • HS(G)34 Storage of LPG at fixed installations, HSE, 1987.
  • Superseded by the above.
  • Paragraph 25 refers to the segregation of LPG vessels from bund walls designed to contain flammable substances. Table 3 summarises the minimum separation distances of LPG vessels from flammable substance’s vessels and bunds, depending on their flashpoints.
  • Paragraph 26 refers to a minimum separation distance of 15m between LPG vessels and toxic/hazardous substances stored under pressure. Table 4 summarises the separation distances of LPG vessels and liquid oxygen depending on their volume capacities.
  • Paragraphs 28-32 refers to the criteria for segregation of LPG vessels from each other and LPG cylinders depending on number of storage vessels and the type of LPG cylinders.
  • HS(G)71 Chemical warehousing: the storage of packaged dangerous substances, HSE, 1998.
  • This document provides general guidance on measures on the design, construction, operation and maintenance of storage areas and buildings used for storing packaged dangerous substances.
  • Paragraphs 29 to 34 describe the classification and labelling of dangerous goods.
  • Paragraph 52 refers to the necessity of training to recognise the dangers of storing hazardous substances and how risk assessments should be used to evaluate training and retraining needs.
  • Paragraphs 60 to 73 describe the measures for segregation of incompatible substances.
  • Paragraphs 74 to 102 describe the building design requirements, including ventilation.
  • Paragraphs 103 to 110 describe the measures for spill control.
  • HS(G)176 The storage of flammable liquids in tanks, HSE, 1998.
  • Paragraphs 46-55 refers to recommended segregation distances during flammable storage. It recommends that tanks stored above ground level should be not be stored near site boundaries, process operations, sources of ignition. The accessibility of the emergency services should also be taken into account. Table 3 is an example of a compact block layout system.
  • Paragraph 50, Table 2 refers to the segregation of small tanks with a diameter of less than 10m. It illustrates the recommended separation distances between them depending on their diameter.
  • Paragraph 52, Table 3 refers to the segregation of each small tank within a group depending on the tank size.
  • Paragraph 55, Table 5 refers to the segregation distance of large tanks.
  • CS21 Storage and handling of organic peroxides, HSE, 1991.
  • This document sets out standards for the safe handling and storage of organic peroxides.
  • Paragraphs 9 to 19 set out the building design requirements.
  • Paragraph 20 sets out the required minimum separation distances.
  • CS3 Storage and use of sodium chlorate and other similar strong oxidants, HSE, 1998.
  • Paragraph 6 refers to the need to separate sodium chlorate from flammable substances and sources of ignition. It can be stored with other compatible strong oxidising agents.
  • Paragraph 7 refers to the need for sodium chlorate to be stored on concrete, brick or steel floors, which are impervious. No smoking area warning signs should be in place within these segregated areas.
  • CS18 Storage and handling of ammonium nitrate, HSE, 1986.
  • Paragraph 12 refers to segregation of ammonium nitrate from possible sources of heat, fire or explosion (e.g., oil storage, gas lines, timber yards, flammable substances, and combustible materials).
  • Paragraph 23 refers to the need for no smoking area warning signs to be placed within these segregated areas.
  • Paragraph 26 refers to the need for the local fire service to be made fully aware of the storage arrangements, the likely quantity of stored ammonium nitrate, and the local water supply.

Further reading material

  • Refining Safety Code, Part 3 of Model Code of Safe Practice in the Petroleum Industry, 1981.
    This publication refers to the segregation and storage of hazardous liquids by classifying them according to their flashpoint.
  • CIA Guidelines for Safe Warehousing of Substances with Hazardous Characteristics, 1990.
  • FPA, Fire Safety Data: Housekeeping and General Fire Precautions, GP6, 1988
    Gives advice on the segregation of flammable liquids, gas cylinders, materials liable to spontaneous combustion and hazardous chemicals segregation.
  • Basic Classification of Flammable and Combustible Liquids. Published by the National Fire Protection Association. (NFPA 321: 1987)
    This publication refers to the segregation and storage of hazardous liquids by classifying them according to their flashpoint. The classification is different to the Institute of Petroleum one by nature of the flashpoint categories.
  • BS 5306Fire extinguishing installations and equipment on premises. Part 2 : 1990 Specification for sprinkler systems.
  • BS 5908 : 1990Code for fire precautions in the chemical and allied industries.
  • Robertson, R.B., ‘Spacing in Chemical Plant Design against Loss of Fire’, IChemE Symposium Series 47, 157, 1976.
  • Sims, R.E. Jr., ‘Safely Store Hazardous and Flammable Materials’, Chemical Engineering 94, 13, p94 September 1987.
  • INDG280 10/98 C400 Code of practice for the safe storage of vehicle airbags.


How do you store hazardous materials? ›

When storing chemicals that are both hazardous and flammable, it's incredibly important that you minimize the risk of a fire, explosion, or spill. These chemicals should be stores in closed containers and kept separate from sources of ignition and other dangerous substances.

What are the general storage guidelines? ›

General Storage Guidelines for Solids and Liquids
  • Do not tip bottles when returning them to a shelf. ...
  • Do not store chemicals (except cleaners) under sinks. ...
  • Avoid stockpiling chemicals.
  • Purchase only what is needed. ...
  • Conduct periodic cleanouts to prevent accumulating unnecessary chemicals.

What is storage of hazardous substances? ›

Hazardous substances should be stored in an area with a clear exit, and it is also advised that the storage area should be close to washing facilities. Substances may also need to be stored in appropriate COSHH cabinets, and should always be stored separately from any others.

What is the proper way to store materials? ›

Store materials and supplies in an organized manner to ensure easy access for retrieval and transportation. Place heavier loads on lower or middle shelves. Store long, tall or top-heavy items on their side or secure them to prevent tipover.

Where should hazardous chemicals be stored? ›

General Storage Requirements

Hazardous chemicals must be stored below eye level. Do not store chemicals on the floor, window ledges, or balconies. Keep containers closed unless you are dispensing a chemical or adding to the container. Use rated storage cabinets or safety cans whenever possible—required for >10 gal.

What chemicals can not be stored together? ›

Storing incompatible chemicals closely together creates a risk of chemical reactions – such as fires, explosions and toxic release.
10 Sets of Chemicals Which Should Never Be Stored Together
  • Chlorine. ...
  • Acetone. ...
  • Iodine. ...
  • H20 (Water) ...
  • Caustic Soda. ...
  • Nitric Acid. ...
  • Hydrogen Peroxide. ...
  • Zinc Powder.

How do you store flammable and hazardous substances? ›

Flammable and oxidising chemicals are incompatible and should be separated. They should also be stored away from ignition sources including direct sunlight. Once you have identified the hazards, you should assess the risks (that is, the likelihood of harm and how serious the harm could be).

What temperature should chemicals be stored at? ›

Refrigerated chemical storage buildings keep temperatures constant in the 40 F (4.4 C) to 65 F (18.3 C) range. Freezer units can even control storage temperatures down to 20 below zero (-28.9 C).

Can you store flammable and corrosive together? ›

Question: Can I store flammable and corrosive chemicals in the same storage cabinet? Reply: Yes, assuming that the chemicals are being stored in accordance with the manufacturers' requirements, in approved containers, and inside an approved storage cabinet.

Where should corrosive materials be stored? ›

Store corrosives in dry, cool areas, out of direct sunlight and away from steam pipes, boilers or other sources of heat. If a sealed full drum or carboy of a corrosive liquid is stored in direct sunlight or near other heat sources, vapour levels in the container can build up.

How long can chemical be stored? ›

chemical reuse guidelines. Maximum storage times: - When storing untreated chemicals that degrade to unstable forms (e.g. peroxide formers such as ethyl ether), limit maximum storage time to one year from purchase or six months from first use.

What is the most important aspect of hazardous material storage? ›

Hazardous materials must be stored so that they are separated from incompatible materials and must be provided with proper secondary containment. Each unit or department that stores or handles hazardous materials is required to do routine, documented self-inspections of the storage areas.

How do you store hazardous waste in the workplace? ›

Store hazardous waste receptacles off the floor, in containers, and out of the elements. As a result, no leaks will happen. The containers will also be protected against environmental deterioration. The waste should be kept in a secure location where the general public won't be able to access it.

How do you store flammable and hazardous substances? ›

Flammable and oxidising chemicals are incompatible and should be separated. They should also be stored away from ignition sources including direct sunlight. Once you have identified the hazards, you should assess the risks (that is, the likelihood of harm and how serious the harm could be).

What is the appropriate storage methods for chemicals and hazardous materials? ›

Safety cans are used when storing hazardous chemicals or when transferring a hazardous liquid. There are many types of liquid storage containers and cans in which to store (and dispose of) chemicals on the job. Their use is OSHA required and flammable liquids can safely be stored in approved safety cans.


1. Introduction to COSHH
(FQM Limited)
2. Flammable & Combustible Hazard Classification || Flammable Liquid || Combustible Liquid || NFPA
3. Construction Site Safety | Hazards & Control Measures in Construction Site | HSE STUDY GUIDE
4. Awareness program on "Contractor HSE Plan during Construction & Commissioning."
(ASSP Kuwait Chapter)
5. Chemical storage safely in hind|storage of chemical on site| Chemical safe storage|Hazardous goods
(Health & Safety Solution)
6. Health and Safety in waste management
Top Articles
Latest Posts
Article information

Author: Amb. Frankie Simonis

Last Updated: 02/13/2023

Views: 5377

Rating: 4.6 / 5 (76 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Amb. Frankie Simonis

Birthday: 1998-02-19

Address: 64841 Delmar Isle, North Wiley, OR 74073

Phone: +17844167847676

Job: Forward IT Agent

Hobby: LARPing, Kitesurfing, Sewing, Digital arts, Sand art, Gardening, Dance

Introduction: My name is Amb. Frankie Simonis, I am a hilarious, enchanting, energetic, cooperative, innocent, cute, joyous person who loves writing and wants to share my knowledge and understanding with you.